Product Information
The HPE Aruba Networking CX 6100 (R9Y04A) is a managed access switch with 48 Gigabit PoE+ ports and four 1/10G SFP+ uplinks. It provides a 740 W PoE budget and 176 Gbps of switching capacity, and mounts in a rack or on a wall.
Key Features
- 48 x 10/100/1000 RJ-45 PoE+ ports (Class 4)
- 4 x 1/10G SFP+ uplinks
- 740 W PoE budget
- 176 Gbps switching capacity
- 4 GB RAM, 16 GB flash
- Rack or wall mount, side-to-side airflow
Product Information
Brand: Aruba
Manufacturer: Aruba
Product Line: HPE Aruba Networking CX
Model: 6100 48G Class4 PoE 4SFP+ 740W Switch
Product Type: Switch
Subcategory: Network hubs and switches
Packaged Quantity: 1
Color Category: Gray
Country: United States
Localization: English
Network and Communication
Advanced Switching: Layer 3
Switching Type: Gigabit Ethernet
Manageable: Yes
Remote Management: CLI, MIB, RMON, SNMP, SNMP 2, SNMP 3
Routing Protocol: IGMP, IGMPv2, IGMPv3, MLD, MLDv2
Authentication Method: RADIUS, Secure Shell (SSH), Secure Shell v.2 (SSH2), TACACS+
Performance: Latency (1 Gbps): 1.9 µs, Latency (10 Gbps): 1.8 µs, Switching capacity: 176 Gbps, Throughput: 98.6 Mpps
Capacity: IGMP groups: 512, IPv4 ACL entries (ingress): 256, IPv4 host table capacity: 1024, IPv4 routes (Unicast): 512, IPv6 ACL entries (ingress): 128, IPv6 host table capacity: 512, IPv6 routes (Unicast): 512, MAC ACL entries (ingress): 256, MLD groups: 512, Packet buffer size: 12.38 MB, Switched virtual interfaces (SVIs) (dual stack): 16
MAC Address Table Size: 8192 entries
Jumbo Frame Support: 9220 bytes
Features: Address Resolution Protocol, Class of Service (CoS), Layer 2 switching, Link Layer Discovery Protocol, Multiple Spanning Tree Protocol (MSTP) support, PoE Class 4, Rapid PVST+ (RPVST+), Rapid Spanning Tree Protocol (RSTP) support, Type of Service (ToS), Uni-Directional Link Detection (UDLD), Unsupported Transceiver Mode (UTM)
Connectivity
Ports: 48
Port Quantity: 48
Port Type: 10/100/1000 (PoE+)
Ports (2nd) Quantity: 4
Ports Type (2nd): 1 Gigabit / 10 Gigabit SFP+ (uplink)
Interface Provided: 1 x USB Type A host, 1 x USB-C console, 4 x Gigabit / 10Gbit LAN SFP+ uplink, 48 x 10/100/1000 Base-T (PoE+) RJ-45 PoE Class 4
Power Over Ethernet (PoE): PoE+
Power
Device Type: Internal power supply
Required Voltage: AC 100-127/200-240 volt
Frequency: 50/60 hertz
Power Consumption Operational: 49.7 watt
Power Provided: 950 watt
PoE Budget: 740 watt
Memory and Processor
Processor Brand: ARM
Processor Number: CortexTM A9
Processors Installed: 1
Clock Speed: 1.016 GHZ
RAM Installed: 4 GB
Memory Technology: DDR3 SDRAM
Flash Memory Installed: 16 GB
Physical Characteristics
Form Factor (Hubs & Switches): Rack-mountable, Wall-mountable
Height (Rack Units): 1
Airflow Direction: Side to side airflow
Dimensions and Weight
Height: 1.7 inch
Width: 17.4 inch
Depth: 12.8 inch
Weight: 10.36 lbs
Certifications and Listing
Compliant Standards: AS/NZS CISPR 32:2015 Class A, CISPR 35: 2016, CISPR-32 Class A, CNS 15936 Class A, EN 55032:2015+A11:2020, EN 55035:2017/A11:2020, EN 60825-1:2014, EN 61000-3-2, EN 61000-3-3, EN 62368-1: 2018, FCC CFR 47 Part 15 Class A, ICES-003 Issue 7: 2020 Class A, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 62368-1: 2014, IEC 62368-1:2018, IEC/EN 60825-1:2014 Class 1, Laser Class 1, UL 62368-1: 2014 2nd Ed., VCCI-CISPR 32 Class A
Compliant Standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x
ENERGY STAR Certified: No
EPEAT Compliant: No
TCO Certified: No
Warranty
Limited Warranty: Limited Lifetime
Service & Support Details: Limited warranty - lifetime
Not sure this fits your network? Send us your current switch, router or chassis model and the DatorPro team will confirm compatibility before you order.