Product Information
The HPE P19982-K21 gives you 1.92TB of mixed use flash storage in a 3.5 inch large form factor (LFF) SSD with a 6Gb SATA interface. The drive runs HPE digitally signed firmware. It comes in an HPE Smart Carrier Converter (SCC) for 3.5 inch bays. It is intended for HPE ProLiant Gen10 servers.
Key Features
- 1.92TB capacity
- SATA 6Gb/s interface
- 3.5 inch LFF
- Mixed Use workload
- Digitally signed firmware
- HPE Smart Carrier Converter (SCC)
Condition: Refurbished (Grade A - Clean)
Warranty: 30 Days Warranty
Specifications
Brand: HPE
MPN: P19982-K21
Option Part Number: P19982-K21
Spare Part Number: P21094-001
General
Device Type: Solid State Drive - Hot-Swap
Capacity: 1.92 TB
Form Factor: 3.5 inch LFF
Interface: SATA 6Gbps
Plug Type: Hot Pluggable
Carrier Type: Smart Carrier Converter (SCC)
NAND Flash Memory Type: Triple-Level Cell (TLC)
Workload Type: Mixed Use
Connectivity: Single Port
Features: Digitally Signed Firmware
Bundled with: HPE Smart Carrier Converter (SCC)
Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
Height: 7 mm Performance 30 Days Writes: 17520
Endurance DWPD: 5
Drive Transfer Rate: 600 MBps (external)
MAX Seq. Reads Throughput (MiB/s): 520
MAX Seq. Writes Throughput (MiB/s): 490
Random Read Average Latency uSec (4KiB,Q1): 125
Random Write Average Latency uSec (4KiB,Q1): 37
Random Read IOPS (4KiB, Q=16): 67000
Random Write IOPS (4KiB, Q=16): 52000
Max Random Read IOPS (4KiB): 75000@Q256
Max Random Write IOPS (4KiB): 52000@Q4
Expansion & Connectivity
Interfaces: 1 x SATA 6 Gb/s
Compatible Bay: 3.5" LFF Power Consumption Power Idle Time: 1.20 Watt
Power Random Read: 1.39 Watt
Power Random Write: 1.39 Watt
Power Sequential Read: 2.24 Watt
Power Sequential Write: 3.23 Watt
Power Random R/W: 1.39 Watt
Maximum Power: 3.23
Compatible Systems
- HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (3.5inch), Medium Solution with HPE ProLiant DL360 Gen10 (3.5inch), Small Solution with HPE ProLiant DL360 Gen10 (3.5inch)
- HPE ProLiant DL Series: DL360 Gen10 (3.5inch), DL360 Gen10 All Flash Server for Weka (3.5inch), DL360 Gen10 Base (3.5inch), DL360 Gen10 Compute Server for Cohesity DataPlatform (3.5inch), DL360 Gen10 Entry (3.5inch), DL360 Gen10 High Performance (3.5inch), DL360 Gen10 Low (3.5inch), DL360 Gen10 Network Choice (3.5inch), DL360 Gen10 Performance (3.5inch), DL360 Gen10 Performance for Cohesity DataPlatform (3.5inch), DL360 Gen10 Premium (3.5inch), DL360 Gen10 SMB (3.5inch), DL360 Gen10 SMB Network Choice (3.5inch), DL360 Gen10 Solution (3.5inch), DL360 Gen10 Special Server (3.5inch), DL380 Gen10 (3.5inch), DL380 Gen10 All Flash Server for Datera (3.5inch), DL380 Gen10 Base (3.5inch), DL380 Gen10 Entry (3.5inch), DL380 Gen10 Entry SMB (3.5inch), DL380 Gen10 for Cohesity DataPlatform (3.5inch), DL380 Gen10 for SAP HANA Compute Block (3.5inch), DL380 Gen10 High Performance (3.5inch), DL380 Gen10 Hybrid Server for Datera (3.5inch), DL380 Gen10 Network Choice (3.5inch), DL380 Gen10 Network Choice for CTERA (3.5inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (3.5inch), DL380 Gen10 Performance (3.5inch), DL380 Gen10 Server for CTERA (3.5inch), DL380 Gen10 SMB (3.5inch), DL380 Gen10 SMB Networking Choice (3.5inch), DL380 Gen10 Solution (3.5inch), DL385 Gen10 (3.5inch), DL385 Gen10 Base (3.5inch), DL385 Gen10 Entry (3.5inch), DL385 Gen10 High-Performance (3.5inch), DL385 Gen10 Performance (3.5inch), DL385 Gen10 SMB (3.5inch), DL385 Gen10 Solution (3.5inch), DL388 Gen10 (3.5inch)
Not sure this drive fits your system? Send us your server or storage model and the DatorPro team will confirm compatibility before you order.