Product Information
The Ubiquiti UniFi Enterprise Campus Core (ECS-CORE) is a 1U Layer 3 aggregation switch for campus and data center networks, not a network adapter. It has thirty two 40/100G QSFP28 ports and one Gigabit RJ-45 port, with 6.4 Tbps switching capacity, 3.2 Tbps non-blocking throughput and 2.8 Bpps forwarding. It has two hot plug 550 W power supplies, five hot swap fans, a 1.3 inch touch display and a rack kit, and supports ACLs, LACP, DHCP services, inter-VLAN routing and Etherlighting ports.
Key Features
- Switch, not a network adapter
- 32 x 40/100G QSFP28 ports
- 6.4 Tbps switching
- Dual hot plug 550 W PSU
- 5 hot swap fans
- 1U, touch display
Product Information
Brand: Ubiquiti
Manufacturer: Ubiquiti
Product Line: Ubiquiti UniFi Enterprise Campus
Model: Core
Product Type: Switch
Subcategory: Network hubs and switches
Compatibility Specs: P/N: UACC-FAN-F2B-4020, UACC-PSU-12V-550W
Packaged Quantity: 1
Color Category: Silver
Network and Communication
Advanced Switching: Layer 3
Switching Type: 100 Gigabit Ethernet
Manageable: Yes
Routing Protocol: RSTP, STP
Performance: Forwarding rate: 2.8 bpps, Non-blocking switching throughput: 3.2 Tbps, Switching capacity: 6.4 Tbps
Capacity: IPv4 ACL entries: 512, IPv4 routes (static): 256, MAC address entries: 512, Packet buffer size: 24 MB, Virtual interfaces (VLANs): 1000
MAC Address Table Size: 128K entries
Features: 12KV ESD Protector (air-gap discharge), 8KV ESD Protector (contact discharge), Advanced IGMP configuration, Device isolation with ACLs, DHCP guardian, DHCP relay, DHCP server, DHCP snooping, Etherlighting ports, Flow control, IGMP snooping, Inter-VLAN Routing, IP-based ALCs, Jumbo Frames support, Link Aggregation Control Protocol (LACP), LLDP-MED, Loop protection, MAC address blocking, MAC and IP-based ACLs support, MAC based port restriction, Multichassis link aggregation (MC-LAG), Network isolation, Port isolation, Port mirroring, Safety latch, SGCC steel housing, Static routing, Voice VLAN
Connectivity
Ports: 32
Port Quantity: 32
Port Type: 40/100 Gigabit Ethernet QSFP28
Ports (2nd) Quantity: 1
Ports Type (2nd): 10/100/1000
Interface Provided: 1 x 10/100/1000 Base-T RJ-45, 32 x 100Gbit/40Gbit LAN QSFP28, Console
Power
Device Type: Internal power supply
Required Voltage: AC 100-240 volt
Frequency: 50/60 hertz
Power Provided: 550 watt
Power Supplies Installed: 2
Redundant Power Supply Supported: 1+1
Redundant Power Supply: Yes
Hot-Plug: Hot-plug
Technical Information
Min Operating Temperature: 23 degree Fahrenheit
Max Operating Temperature: 104 degree Fahrenheit
Operating Humidity: 10 - 95% (non-condensing)
Physical Characteristics
Form Factor (Hubs & Switches): Rack-mountable
Height (Rack Units): 1
Built-in Devices: 1.3" LCM touch screen display, 5 hot-swap fans
Rack Mounting Kit: Included
Dimensions and Weight
Height: 1.7 inch
Width: 17.4 inch
Depth: 18.9 inch
Weight: 21.38 lbs
Certifications and Listing
Compliant Standards: ESD, FCC, IC
ENERGY STAR Certified: No
EPEAT Compliant: No
TCO Certified: No
Not sure this adapter or module fits your system? Send us your server, switch or storage model and the DatorPro team will confirm compatibility before you order.